Discover Yahoo! With Your Friends

Explore news, videos, and much more based on what your friends are reading and watching. Publish your own activity and retain full control.

To get started, first

YOUR FRIENDS' ACTIVITY

    Master basic home repairs

    Why pay for fixes that you can do yourself?

    Photo: Shutterstock.comQ: I'm a new condo owner. I'm not handy at all, but I figured I'd better learn some of the basics or get ready to shell out the bucks for a contractor to do what I should do myself.

    I've got two questions for you guys:

    • How do I learn the basics of home repair?

    • What tools should I buy?
    A: Congratulations.

    We applaud your desire to do the work yourself. There's a lot you can do to save time and aggravation, not to mention money, by not hiring work out.

    To start your education we suggest that you do two things. First, read. Go to the library and borrow some books on basic construction. Flip through them and focus on what strikes your fancy. Don't forget magazines. Especially check out Fine Homebuilding magazine. Although advanced, it's a good place to get tips on some basic skills.

    [Not sure DIY is for you? Click to find contractors now.]

    Second, watch television. We've said many times that we cut our building teeth watching "This Old House." We learned a ton about carpentry from Norm Abrams and Tom Silva, plumbing from Rich Trethewey, and other tricks of the trades from master builders over the years. "Holmes on Homes" is also a good show to check out.

    In the same vein, check out YouTube on the Internet. We've seen a number of excellent tutorials from hanging pictures to building the walls they hang on.

    Then it's time to apply what you've learned. Start with the simple stuff. If a door sticks, adjust the hinges. If a faucet leaks, replace the washer. If your laundry room needs shelves, build them. You'll make mistakes, but they can be fixed. Pretty soon you'll be comfortable. That's how we started, and we ended up designing and building a house.

    This leads to the answer to your second question: our suggestion for a basic set of tools. Our beginner set has only one power tool: an 18-amp cordless drill with bits and nut drivers. The rest are hand tools. Buy quality and they'll serve you for a lifetime. Kevin still uses some of our grandfather's tools. Here's our list of must-have hand tools:

    [Think doing it yourself might be too much to handle? Click to find a contractor now.]

    Hammer: The 16-ounce rip model is the hammer we'd have if we were limited to one. It's a good all-purpose hammer. The claw is straight, allowing for pulling nails or ripping into walls. Buy one that feels well balanced in your hand. Make sure the one you choose is heavy enough to drive a nail efficiently but light enough to control.

    Retractable utility knife: This all-purpose cutting tool has any number of uses.

    Speed square: The square (really an aluminum triangle) is used for marking 45- and 90-degree lines. Get the 7-inch version because it fits easily in a tool pouch.

    Tape measure: A 25-footer with a 1-inch-wide blade is the most useful. It's long enough to measure pretty much anything and the 1-inch width allows the blade to extend up to 8 feet without buckling.

    Level (or spirit level): This is a must-have for hanging pictures or for marking a plumb line as a guide to hanging wallpaper. The longer the level, the more accurate the line. We've found a 4-foot level to be a good size, with 3 feet being the minimum.

    Crosscut handsaw: Before power saws there were handsaws. When you want to make a cut with optimum control, the handsaw is the tool.

    Channel-lock pliers: To be used for loosening drains under the sink, among other things.

    Four-in-one screwdriver: This versatile tool is a large and small flat head and Phillips head tool in one.

    Adjustable crescent wrenches (6- and 14-inch): Crescent wrenches adjust to fit most nuts and bolts. The larger size gives more leverage and the smaller size fits more easily into tight places.

    Basin wrench: Sooner or later you will have to change a water faucet in the kitchen or bath. When you do, this inexpensive specialty tool is used for detaching water supplies from underneath a sink.

    Voltage tester: We suggest that most home electrical work be left to the pros. But the homeowner may try some very small fixes. Before working on any electrical circuit, make sure the power is off and test it with this tool.
     

    170 comments

    • tony the grouch  •  15 hours ago
      Only tool I hhave that lists itself as X AMPS is a corded reciprocating saw. Every battery tool I have is listed in VOLTS, not Amps.
      • Mike 5 hours ago
        I just watch "joe" & he usually tells me what tools I need for whatever project he's working on. He's fun to watch too, as I never know what he's going to say next. You can find "joe" on YouTube under VideoJoeKnows. Look for him. :0
      • Jason 2 hours 32 minutes ago
        No sawzall or power drill/screwdriver? Have fun wasting your whole weekend because you couldnt drop 60 bucks on a couple power tools.
      • geniusandinsanitywalkdown ... 1 hour 40 minutes ago
        The writer of this article should stick with what they know (writing)!
    • Bob S  •  12 hours ago
      I have 45 years in the construction industry, specificaly residental. Another 12 years with a Dad that had us learning some basic building learning. Tools are great ....and needed but remember, the hammer can only work as good as the guy using it. Do whatever you can to spend time with "someone" in how and why tools do what they do. More times than not, homeowners are convinced by the wrong sources of a "can do job" that has far more depth than they are capable. I'm so glad to see folks taking on some things for there selves but....!

      Just know and accept your limits.
      • NORMAN 11 hours ago
        30 years in the utility industry, and that many + more re-habbing homes on the side. Some folks CAN learn to do their own repairs, but after retiring, I now do handyman work, and often as not, I'm fixing somebodys' "fix".......... I am also very leery of the article, and suspect more than a few flashes and tripped breakers (or worse) and/or leaky pipes from ill-informed fixers. At the very least, learn from a knowledgeable friend or relative before you fly solo....... my 2 cents.
      • NukeChina 8 hours ago
        @bob s , who R U , jesuzchrist O DeDevil
      • Mike 4 hours ago
        For most people who don't know too much about the building trades, I tell them to spend some time with "joe". He's on YouTube & is straight forward for the beginnner/intermediate DIY'er. He worked for me! He hangs out on YouTube under VideoJoeKnows. He has over 800 howto videos. If the hammer doesn't work, just get a bigger hammer!......that's what they used to tell me anyway!...lol
    • Michael  •  Buffalo, New York  •  16 hours ago
      You'd probably be better off with an 18 volt cordless drill, instead of an 18 amp.
      • tony the grouch 15 hours ago
        I went to buy an 18 Volt cordless at Sears a few years ago, and the salesperson suggested that unless I was going to be building a house, a 12 Volt was better, lighter, better balance, and less expensive. I think it actually has more torque than an older 1/2" corded drill I have.
      • Mike 4 hours ago
        Ha....good one!
      • Joshua 3 hours ago
        The article had to be written by a Lowe's employee- they sell 2x4's that are smarter than most of their employees.
    • Ang  •  2 hours 33 minutes ago
      Where is the duct tape? You cannot operate a home or apartment without this staple for emergencies. It will temporarily resolve most plumbing issues (and others as well) until you can either get a plumber or figure out how to fix it. Duct tape rules.
    • mariedn  •  3 hours ago
      When did learning about hammers, screwdriver, saws, wrenches, etc become something that is only associated with owning a home? Yous hould know how to use the basics no matter who you are and where you live.
    • Ravengotu C  •  Gainesville, Florida  •  3 hours ago
      I think it was written in conjunction with a Lowes/Home depot employee.....They always show some of the most basic( the kind that most all should know already) Yes I am sure most residental contractors are drooling about now.....Go start that HGTV project where they have a crew of 15 with just yourself...Hope you have hair
      • geniusandinsanitywalkdown ... 1 hour 35 minutes ago
        most annoying show of all time is called 'design on my dime' where 15 people work for free for a week to give homeowners the msot unrealistic expectations of all)!
    • william  •  Tucker, Georgia  •  19 hours ago
      That guy is the picture has some serious eyebrows.
      • Susan 12 hours ago
        Admits to scrolling up just to check his eyebrows.... you're right!
      • HARVEY 2 hours 23 minutes ago
        I'm a retired Handyman with 3 daughters and 4 "grown"Grandsons. None of them has ever expressed any interest in my 24x36 workshop,my tools or learning anything...rather hopeless.
      • geniusandinsanitywalkdown ... 1 hour 36 minutes ago
        he works in a profession where men dont yet have to shave their eyebrows or trim them (few manginas in the contruction trades, thank god)
    • Big-Tim  •  10 hours ago
      I think in the text they ment to say 18 volt cordless drill, not 18 amps!
    • geniusandinsanitywalkdown ...  •  Tallahassee, Florida  •  1 hour 39 minutes ago
      Dont let people borrow your tools if they dont own any (if they dont own tools, they dont know how much they cost and thus will likely mistreat them)!
    • geniusandinsanitywalkdown ...  •  Tallahassee, Florida  •  1 hour 41 minutes ago
      Guys who work with their hands are so often treated like the dumbest in society (well, now you folks can show us how much smarter you are - should be easy enough - hope you dont lose a toe or a finger)!
    • geniusandinsanitywalkdown ...  •  Tallahassee, Florida  •  1 hour 43 minutes ago
      Took me only thirty years to acquire my skill set at home repairs! Should be easy, right (good luck)!
    • geniusandinsanitywalkdown ...  •  Tallahassee, Florida  •  1 hour 42 minutes ago
      My job security is that this AINT easy! Well, it is for me, i have used a drill for over thirty years!
    • Mr Jack  •  North Tonawanda, New York  •  44 minutes ago
      A rip hammer?? Rip would be a saw and of course the 18 amp drill instead of volts. The best place for a man to learn construction is from his father and maybe a little from shop classes in Jr High and High School.
    • A Ch  •  Cranbury, New Jersey  •  58 minutes ago
      library books are too outdated. unless they are ebooks. the internet is the best source for diy help
    • -Matt-  •  Flint, Michigan  •  58 minutes ago
      "an 18-amp cordless drill with bits and nut drivers." - My 5ft (110v of course) drill press isn't even 18 amps. I'm sure they meant 18 volts. They're obviously not "tool guys" but how did two authors writing one article miss this?
    • T  •  Charlotte, North Carolina  •  1 hour 3 minutes ago
      Bill and Kevin Burnett seem to be two guys that have never touched a tool in their life given how many mistakes are in this article. They even completely ignore the fact that this guy lives in a condo which use COMMERCIAL building techniques and REQUIRE that the homeowner touch nothing mechanical since he lives in a multi-family dwelling. What a couple of fools!
    • Doug  •  Overland Park, Kansas  •  2 hours 6 minutes ago
      30 years in and I must say that number one should be, NEVER EVER go to Home Depot/Lowes and ask the HELP for HELP. These are sales persons and rarely have any building knowledge to speak of. Several times Ive been in one and when the HELP finished their speech I explained to the customer the correct way to do the project. Once I stepped right in front of the departments manager who had just given completely wrong info and had they done what was prescribed they would have likely flooded their home.

      It really depends on how you "learn" what approach to take. Do you read, learn by example, or trial and error? My best suggestion try to find a remodel/new construction project and talk to the contractors.

      Also please remember with the TV shows you are often getting a 30 minute, edited version of projects that could take days, weeks by professionals with ALL the rights tools who know what they are doing and do it every day. So know your limits.
    • jeff  •  Mt Morris, Michigan  •  19 hours ago
      cordless drills are rated by volts, not amps
    • Dahlgren  •  12 hours ago
      Do these guys know about tools? Not really.They must have read about them or seen them in a cartoon.Get a crosscut saw,a hammer with a curved claw,a hack saw, a corded power drill (3/8 will cover most every thing) some good screwdrivers , a torpedo level , a two foot level , about 10 " channelocks , an 8 and 10 adjustable wrench , a good pair of wirecutters. A flat nailbar like the stanley 'wonderbar' and you'll be off to a good start.
      Oh yes, a combination square and a tape measure. A12 or 16 foot tape measure will cover a lot and doesn't weigh five pounds.
      If you do get a cordless drill ,get two batteries.
    • Buck  •  18 hours ago
      "Crosscut handsaw: Before power saws there were handsaws. When you want to make a cut with optimum control, the handsaw is the tool."

      Nope. Crosscut handsaws are obsolete for a reason. A good miter saw is best if you don't have room for a radial arm saw. Dedicate a medium sized area in your basement for a workroom.
      Plan ahead for your project, do the research and determine what tools you will need for the project. PBS has some great woodworking shows, watch them.
      Some tools are expensive and take up room so find the room and save up for them. When you consider the money contractors charge your tool expense will seem like a bargain. Buy quality tools so you only have to buy them once.

      I stayed away from Ridgid tools from Home Depot because they look like they are made cheap but they now have a lifetime warranty (you MUST register them) on certain power tools, batteries included in the warranty. Hey, if they are willing to supply me with new power drills and batteries as long as I live then that's fine with me!

      Also, don't make a 15' x 30' addition on your house your very first project. Start small. Build some shelves, drywall your basement, trim some windows, etc. When you get comfortable using your tools and your projects start looking more professional as time goes on, then tackle some bigger stuff.
      Know your limits. I do most of my own wall construction, insulation, landscaping, electrical, plumbing, cabinet making, painting and staining. I even build furniture but I also know when to call in the professionals. I had a bathtub faucet locked on so tight I couldn't remove it. I couldn't nudge it even a little bit and I worked on it for 5 minutes! Rather than break something I called a plumber. I think that was money well spent.

      As you do more and more projects keep your eyes open for tools that will make difficult or impossible jobs easier. When I started out a cordless drill and a miter saw handled about 90% of my project needs. As my projects got more involved I added more tools. They certainly paid for themselves many times over.

    Join us on Pinterest